Reset Search
 

 

Article

How to get the serial number of Altitude Access Points

« Go Back

Information

 
TitleHow to get the serial number of Altitude Access Points
Objective
How to get the serial number of Altitude Access Points
Environment
  • All Altitude Access Points
Procedure
From GUI:
1. Browse into WiNG 5.x Controller
2. Click on
Statistics tab
3. Click on
RF Domain in the left pane
4. Click on Wireless Controller and it will show the adopted Access Points
5. Select the Access Point(s) for which you need to get the serial number(s)
6. Select
Device option and the serial number of the access point will be displayed on the right pane

From CLI Access:
1.Log into the controller via ssh or the console port
2. From controller Type
connect <AP name> or connect IP <Address of AP>
3.Enter the username of the AP. Default Username is Admin
4.Enter the password of the AP. Default Password is admin123
5.After logging into AP via Telnet, type show version. The serial number will be listed in the output.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255