Reset Search
 

 

Article

How to install an xmod file in EXOS

« Go Back

Information

 
TitleHow to install an xmod file in EXOS
Objective
Install an xmod modular image file in EXOS
Environment
EXOS All
Procedure
  1. Upload the xmod file to a TFTP server that the switch can reach.
  2. Ensure you are able to ping the TFTP server from the appropriate virtual router. At least one of ping vr vr-Mgmt <host> or ping vr vr-Default <host> operations must successfully reach your TFTP server before you can proceed. After verifying the TFTP server is reachable, specify that VR when you download the image in the next step.
  3. Type the command download image <host> <filename.xmod> <virtual-router>, and select yes when asked if you want to install the image after downloading.
  4. After the xmod downloads and installs, type the command run update to finish the installation process.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255