Reset Search
 

 

Article

How to load configuration via ZTP+ on device discovery

« Go Back

Information

 
TitleHow to load configuration via ZTP+ on device discovery
Objective
Unlike ZTP, ZTP+ does not allow you the use of the "Load Configuration" option in the "Discovered" tab. Only ZTP has use of this feature.

It is possible to create a script with a configuration template to run on device discovery using TCL script.
 
Environment
  • EXOS 21.x (Supported for now on all standalone Summit switches that support EXOS 21.x)
  • Control Center (Extreme Management Center)
  • Netsight 7.x
Procedure
The following script can be used to TFTP a .XSF configuration files from a server.
​enable cli scripting

tftp get <ip> config.xsf

load script config

Or the following script can be used with a list of the required CLI commands for the configuration.

For example,
enable cli scripting

create vlan vl1 tag 11
create vlan x12 tag 12

configure vl1 add port 48 tagged
configure vl2 add port 48 tagged

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255