Reset Search
 

 

Article

How to locate the serial number from a WiNG 5 device using the CLI (Command Line Interface).

« Go Back

Information

 
TitleHow to locate the serial number from a WiNG 5 device using the CLI (Command Line Interface).
Objective
How to locate the serial number from a WiNG 5 device using the CLI (Command Line Interface).
Environment
WirelessWiNG
WiNG v5
WiNG5
RFS6010
RFS7010
RFS4010
NX9XXX
NX75XX
NX65XX
NX45XX
NX55XX
AP8432
AP8533
AP82XX
AP8132
AP75xx
AP76xx
AP71xx
AP6521
AP6522
AP650
AP621
AP622
AP75xxE
AP65xxE
NX55XX-E
NX75XX-E
Procedure
Access the WiNG 5 device via Telnet, SSHv2, or console serial connection (by default, Telnet is disabled) and perform the following:

show version [enter]

Output should resemble the following example:

NX7500>show version
NX7500 version 5.9.1.2-006R
Copyright (c) 2004-2017 Extreme Networks, Inc. All rights reserved.
Booted from primary

NX7500 uptime is 0 days, 03 hours 29 minutes
CPU is Intel(R) Xeon(R) CPU  @ 2.00GHz, No. of CPUs 8
Base ethernet MAC address is 84-24-8D-7F-42-59
System serial number is 15156021110032
Model number is NX-7530-100R0-WR

NX7500>
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255