Reset Search
 

 

Article

How to prepare Fabric Connect for WiNG AP deployment?

« Go Back

Information

 
TitleHow to prepare Fabric Connect for WiNG AP deployment?
Objective
What is needed in order to attach WiNG devices to existing Fabric solution?
Environment
  • Extreme Fabric
  • Fabric Connect
  • Fabric Attach
  • ExtremeWireless WiNG
  • ERS
  • VSP
  • WiNG 5.9.2
Procedure
First of all, you'll have to make sure that your ERS FA Proxy has correct zero-touch configuration and VSP FA Server provides correct setup

User-added image

Then confirm that WiNG is prepared for FA to provide zero-touch config

User-added image

Once AP picks up link, confirm that FA elements are assigned

User-added image

If all this is done correctly, you'll see that I-SID is correctly assigned on GE1 of WiNG AP

User-added image

Presentation available under following link
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255