Reset Search
 

 

Article

How to prevent the adoption of APs on a WiNG controller

« Go Back

Information

 
TitleHow to prevent the adoption of APs on a WiNG controller
Objective
To prevent the adoption of APs on a WiNG controller.
Environment
  • WiNG 5.x
  • WiNG controllers
  • VX9000
Procedure
We will configure this setting as an override. 
  1. Open a browser window and log into your controller
  2. Click on Configuration
  3. By default, Devices > Device Configuration, will already be selected. From the list in the table (on the right) double click on the controller
  4. From the menu tree, go to Adoption
  5. Under Controller Adoption Setting > Allow Adoption of Devices, uncheck the Access Points box.
  6. Click on OK in the bottom right hand corner of the page
  7. Click on Commit and Save in the top right hand corner of the page
User-added image


 
Additional notes
If you already have APs adopted on this controller, but would like to prevent others from adopting, you will need to create auto-provisioning policies in this case.

Please contact our technical support team if further assistance is required. 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255