Reset Search
 

 

Article

How to register my Access Point with the ExtremeCloud

« Go Back

Information

 
TitleHow to register my Access Point with the ExtremeCloud
Objective
How to register my Access Point with the ExtremeCloud
Environment
ExtremeCloud
Procedure
After you create an ExtremeCloud account:
  1. Connect your device to an Ethernet network port with an Internet connection, and a power source (transformer or PoE). The device discovers ExtremeCloud and the device gets configured automatically.
  2. If you are not logged in, log into your ExtremeCloud account at https://ezcloudx.com.
  3. Look for the device in your Devices list.
Verify that the LEDs are on and not blinking, which indicates that the AP is activated in the cloud.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255