Reset Search
 

 

Article

How to replace a faulty IdentiFi Wireless Controller

« Go Back

Information

 
TitleHow to replace a faulty IdentiFi Wireless Controller
Objective
How to replace a faulty IdentiFi Wireless Controller
 
Environment
  • IdentiFi
  • RMA replacement
  • New Wireless Controller
  • Old Controller
  • Saved backup file
Procedure
  1. Have a laptop with an FTP server application running
  2. Start FTP Server
  3. Download same firmware and Release Notes as running controller into the FTP Home Directory
  4. Unzip image(s) on  the PC - store them in FTP Home Directory
  5. Verify, through release notes, if interim image versions are needed
  6. Backup configuration from old controller or locate previously saved backup file  How to download configuration file from a Wireless Controller 
  7. Gain access to new controller through "admin" port (reference hardware guide that came with the controller for admin port location) How to login to the management port of the IdentiFi Wireless Controller
  8. Assign a static IP of 192.168.10.10/24 with no gateway to your PC
  9. Using the controllers GUI (default admin port IP https://192.168.10.1:5825), upload images to controller if needed and perform the upgrade - How to upgrade an IdentiFi Wireless Controller
  10. Once the controller has rebooted from the upgrade, Rehost controller licenses and apply - How to rehost an IdentiFi wireless license key for a replacement controller
  11. Apply configuration to controller and verify final configuration - How to save and restore backup files on the IdentiFi Wireless Controller
Additional notes





 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255