Reset Search
 

 

Article

How to reset a WS-AP26XX Access Point back to factory default

« Go Back

Information

 
TitleHow to reset a WS-AP26XX Access Point back to factory default
Objective
  • How to Reset an Access Point WS-26XX back to Factory Default.
Environment
  • WS-AP2610
  • WS-AP2620
  • Factory Reset
Procedure
Method#1
  1. Telnet to the AP 
  2. Login: admin
  3. Password: new2day OR e~=2.718 ,or e~=2.147 (if new out of the box and never registered with a controller)
  4. Enter the following commands in the CLI after the -> prompt:
AP2610 (E_EUP) wlan0 -> rm apcfg
AP2610 (E_EUP) wlan0 -> rm apcfg.bak
AP2610 (E_EUP) wlan0 -> rm acinfo.conf
AP2610 (E_EUP) wlan0 -> set factory
AP2610 (E_EUP) wlan0 -> reboot

Method#2
  •  Power up the AP and interrupt the power during the vulnerable time interval three consecutive times, the next time the AP reboots, it will restore its factory defaults including the user password and the default IP settings.

 

 

 
Additional notes





 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255