Reset Search
 

 

Article

How to set an SNMP Trap to monitor port changes on EXOS device

« Go Back

Information

 
TitleHow to set an SNMP Trap to monitor port changes on EXOS device
Objective
Setting an SNMP trap to monitor a specific port or port list for link changes
Environment
  • Summit: All
  • EXOS: All
Procedure
Issue the command below:
enable snmp traps port-up-down ports <port | port-list>
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255