Reset Search



How to set coordinates for device in WiNG Network View?

« Go Back


TitleHow to set coordinates for device in WiNG Network View?
While placing APs and devices to floorplan using CLI you experience incosistent placement.
This is process of correct coordinates assignment.
  • All Summit WM3000 Series Controllers
  • ExtremeWiNG Controllers
  • WirelessWiNG Controllers
  • ExtremeWiNG Access Points
  • WirelessWiNG Acess Points
  • WiNG 5 Software
When placing APs using CLI command layout-coordinates make sure you use correct starting point of the image.

WiNG does not take 0x, 0y as a corner position but as precise middle of the picture.
That being said, using picture with resolution of 400x400 pixels won't place AP with coordinates 0x 0y (7532) to a corner, but to the middle of floorplan!
Other AP, with coordinates 200x 200y (2357), will be placed to right bottom corner.
User-added image
Additional notes
I recommend to set coordinates using CLI as GUI might get delayed due its Flash nature.



Was this article helpful?



Please tell us how we can make this article more useful.

Characters Remaining: 255