Reset Search
 

 

Article

How to setup IdentiFi Wireless Controller admin interface through CLI

« Go Back

Information

 
TitleHow to setup IdentiFi Wireless Controller admin interface through CLI
Objective
How to setup IdentiFi Wireless Controller admin interface through CLI
Environment
  • IdentiFi Wireless
  • All firmware versions
Procedure
 
extremenetworks.com# topology
extremenetworks.com:topology# Admin
extremenetworks.com:topology:Admin# l3
extremenetworks.com:topology:Admin:l3# ip 10.67.72.221/24
extremenetworks.com:topology:Admin:l3# mtu 1500
extremenetworks.com:topology:Admin:l3# gateway 10.67.72.1
extremenetworks.com:topology:Admin:l3# apply

extremenetworks.com:topology:Admin:l3# show
Interface IP 10.67.72.221 255.255.255.0
Factory default certificate/key
Factory default IPv6 certificate/key
Static IPv6 Address:
Static IPv6 Gateway: none
MTU: 1500
Gateway: 10.67.72.1
Dynamic IPv6 Address:
1: fe80::290:bff:fe40:d8ac 64

Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255