Reset Search
 

 

Article

How to tell NetSight not to poll a device that is modeled

« Go Back

Information

 
TitleHow to tell NetSight not to poll a device that is modeled
Objective
Stop NetSight from polling a modeled device.

Example of use:  Location is having maintenance work done and these device will be down for a specific time.  Polling can be disabled so alarms from those device will not be generated
Environment
NetSight
Console
Extreme Management Center
Procedure
1.  Start NetSight Console.
2.  Select the device from the Device Tree.
3.  Change the Properties tab.
4.  Select the Access radio button.
5.  Click the Show/Hide table editor button to the upper right.
6.  In the row edit, below the horizontal scroll bar, select Not Polled under the Poll Type column.
7.  Press the Enter key. There should no be a green ! next to that enter in the above window.
8.  Click the Apply button to the upper right.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255