Reset Search
 

 

Article

How to turn off port link state traps

« Go Back

Information

 
TitleHow to turn off port link state traps
Objective
How to turn off port link state traps
Environment
  • 7100-Series
  • K-Series
  • S-Series
  • SecureStack 
Procedure
  1. SSH/Telnet to switch
  2. Use the following command
    set port trap ge.1.2 disable
If you need to disable it on all ports use *.*.* in the port string
Additional notes
MIB

ifLinkUpDownTrapEnable
 1 = Link-state traps enabled
 2 = Link-state traps disabled
1.3.6.1.2.1.31.1.1.1.14

 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255