Reset Search
 

 

Article

How to use DHCP service policy with activation criteria?

« Go Back

Information

 
TitleHow to use DHCP service policy with activation criteria?
Objective
Using DHCP service on clustered controllers or RF-Domain managers need to have activation criteria set to maintain operation when cluster fails.
Environment
  • All Summit WM3000 Series Controllers
  • ExtremeWireless WiNG Controllers
  • ExtremeWireless WiNG Access Points
  • WiNG 5 Software
Procedure
While creating DHCP server policy as mentioned in article How to configure DHCP services useing CLI on WiNG Access Points add one conditional command in global policy configuration as per below screen shots:

Using graphical user interface 
User-added image

Using command line interface
VX(config-dhcp-policy-TEST)#dhcp-server activation-criteria ?
  cluster-master                       When cluster master
  rf-domain-manager                    When RF Domain manager
  vrrp-master                          When VRRP master

Once proper condition is selected (for cluster configuration use cluster-master, for site limited DHCP server use rf-domain manager) map the policy to correct profile.

Using graphical user interface
User-added image

Using command line interface
VX#configure
Enter configuration commands, one per line.  End with CNTL/Z.
VX(config)#profile vx9000 default-vx9000
VX(config-profile-default-vx9000)#use dhcp-server-policy TEST

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255