Reset Search
 

 

Article

How to use Extreme Webshell from Extreme Management Center

« Go Back

Information

 
TitleHow to use Extreme Webshell from Extreme Management Center
Objective
Extreme Management Center version 8.x makes use of a built in Webshell that can be launched to Telnet or SSH into a device.
Environment
  • EMC
  • Webshell
  • SSH 
  • Telnet
  • Netsight
  • Oneview
Procedure
From Extreme Management Center
1. Select Network
2. Select Device
3. Select Devices Tab

User-added image
4. Select Device you want to use ExtremeShell and highlight with left click
5. Right Click on device and then select Device
6. Select Open Device Terminal
User-added image

7. The Shell/Terminal will then attempt to login to the device using the CLI credentials configured for the device.
User-added image
8. To Exit the shell, you will need to hit X on upper right.
Additional notes
To learn more about setting up CLI credentials for the device, if not configured correctly, see the following article
How to setup a Profile for SNMP and CLI credentials in Extreme Management Center

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255