Reset Search
 

 

Article

Mesh Bridge Layer 2 adoption

« Go Back

Information

 
TitleMesh Bridge Layer 2 adoption
Objective
New Deployment 5.8.6 of AP7532. AP's not adopting to controller across mesh link. None root AP is adapted to controller
Environment
  • AP71xx
  • AP65xx
  • AP81xx
  • AP75xx
Procedure
 By default Layer 2 MiNT traffic will not be passed through the MeshConnex link. In case adoption of Access Points behind MeshConnex link is required it is recommended to use IP-based MiNT links.

 If Layer 2 MiNT Links are required.  Configure " MiNT link vlan # " on None-Root-AP and AP profiles. where " Vlan # " is the Native Vlan.

 
VX9000-home#enable
VX9000-home#config terminal
VX9000-home(config)#profile ap71xx AP7131NONE-ROOT
VX9000-home(config-profile-AP7131NONE-ROOT)#mint link vlan 1
VX9000-home(config-profile-AP7131NONE-ROOT)#com wr

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255