Reset Search
 

 

Article

How to send WOL magic packets to other subnets outside VCS

« Go Back

Information

 
TitleHow to send WOL magic packets to other subnets outside VCS
Objective
How to send WOL magic packets to other subnets outside VCS
Environment
  • Network OS
  • VDX Series
  • Wake On LAN Magic Packets
  • Topology

    Topology
 
Procedure
  1. Configure the Devices in the network. 
    VDX1/VDX2
    !
    Rb1# show interface description rbridge-id all | exclude "--"
    Port        Type    Speed   Description 
    Te 2/0/2     eth     10G      link_to_CER1    
    Te 1/0/2     eth     10G      WAKE-ON-LAN-SERVER
    
    Rb1# show vlan brief
    Total Number of VLANs configured    : 4   
    Total Number of VLANs provisioned   : 4   
    Total Number of VLANs unprovisioned : 0   
    VLAN             Name            State                      Ports           Classification                
    (F)-FCoE                                                    (u)-Untagged
    (R)-RSPAN                                                   (c)-Converged
    (T)-TRANSPARENT                                             (t)-Tagged
    ================ =============== ========================== =============== ====================
    1                default         ACTIVE                     Te 2/0/2(t)     
    
    99               Link_to_CER1    ACTIVE                     Te 2/0/2(t)     
    
    200              VLAN0200        ACTIVE                     Te 1/0/2(u)     
    
    Rb1# sh run rb int ve
    rbridge-id 2
     interface Ve 99
      ip ospf area 0
      ip ospf network point-to-point
      ip address 10.10.20.1/30
      no shutdown
     !
     interface Ve 200
      ip proxy-arp
      ip address 192.168.0.1/24
      no shutdown
     !
    
    Rb1# show running-config rbridge-id router ospf
    rbridge-id 2
     router ospf
      redistribute connected
      area 0
    
      
    CER1
    telnet@CER1#sh running-config 
    no spanning-tree
    !
    vlan 1 name DEFAULT-VLAN 
    !
    vlan 99 name Link_to_VDX2 
     tagged ethe 2/1 
     router-interface ve 99
    !
    ip router-id 1.1.1.1
    snmp-server
    hostname CER1
    !
    router ospf
     area 0 
     redistribute connected                                                           
    !
    interface ethernet 2/1
     enable
    !
    interface ethernet 2/2
     port-name Link_to_CER2
     enable
     load-interval 30
     ip ospf area 0
     ip ospf network point-to-point
     ip address 192.168.1.1/30
    !
    interface ve 99
     port-name Connection to VDX2
     ip ospf area 0
     ip ospf network point-to-point                                   
     ip address 10.10.20.2/30
    
     
    CER2
    telnet@CER2#sh running-config 
    no spanning-tree
    !
    vlan 1 name DEFAULT-VLAN 
    !
    vlan 100 
     untagged ethe 1/2 
     router-interface ve 100
    !
    vlan 101 
     untagged ethe 1/1 
     router-interface ve 101                                                                
    !               
    ip directed-broadcast
    !
    ip router-id 2.2.2.2
    snmp-server
    hostname CER2
    !
    router ospf
     area 0 
     redistribute connected
    !
    interface ethernet 1/1
     port-name Link_to_PC1
     enable
    !
    interface ethernet 1/2
     port-name Link_to_PC2
     enable
    !
    interface ethernet 2/2
     port-name Link_to_CER1
     enable
     ip ospf area 0
     ip ospf network point-to-point
     ip address 192.168.1.2/30
    !
    interface ve 100
     ip address 192.168.20.1/24
     ip directed-broadcast
    !
    interface ve 101
     ip address 192.168.30.1/24
     ip directed-broadcast                                            
      
  2.  Check if the WOL magic packets are received

    Wake On LAN capture
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255