Reset Search
 

 

Article

AP6532 unable to access Web UI.

« Go Back

Information

 
TitleAP6532 unable to access Web UI.
Objective
Unable to access AP Web UI. 
Environment
  • AP650
  • AP6511
  • AP621
  • AP6532
Procedure
 
  • Verify that “https server” is enabled on the “management-policy ”. 
>enable
#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
#management-policy default
#show context
management-policy default
no telnet
no http server
https server
no ftp
ssh
 
  • Configure memory-profile standalone  ​​
>enable
#self
Enter configuration commands, one per line.  End with CNTL/Z.
#memory-profile standalone
Note: memory-profile change will take effect after device reboot
#commit write
 
  • The AP should automatically start reloading. After a couple of minutes, the AP should be back up and operational and you should be able to access the AP via HTTPS.
Additional notes
Please contact technical support if further assistance is required. 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255