Reset Search
 

 

Article

WiNG How to configure WLAN BSS map within AP Profile on WiNG controller

« Go Back

Information

 
TitleWiNG How to configure WLAN BSS map within AP Profile on WiNG controller
Objective
  • WiNG How to configure WLAN BSS map within AP Profile on WiNG controller 
Environment
-WiNG
-WiNG Controller
Procedure
  1. Refer to the WLAN/BSS Mappings field to set WLAN BSSID assignments for an existing access point deployment.

    Use the ‘<‘ or ‘>’ buttons to assign WLANs and mesh points to the available BSSIDs.

    You can assign each WLAN its own BSSID. If using a single-radio access point, there are 8 BSSIDs available. If using a dual-radio access point there are 8 BSSIDs for the 802.11b/g/n radio and 8 BSSIDs for the 802.11a/n radio. Each supported access point model can support up to 8 BSS IDs.

  2. Select Advanced Mapping to enable WLAN mapping to a specific BSS ID.

  3. Select OK to save the changes to the WLAN Mapping. Select Reset to revert to the last saved configuration.

    User-added image

Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255