Reset Search
 

 

Article

How To Prevent Wing APs From Attempting To Adopt To Wing Controllers via CLI Instructions

« Go Back

Information

 
TitleHow To Prevent Wing APs From Attempting To Adopt To Wing Controllers via CLI Instructions
Objective
Preventing standalone APs from trying to adopt to controllers by disabling mint protocol on the APs
Environment
  • WiNG 5.x
  • WiNG controllers
  • VX9000
  • VX9000 Express
  • Access Point
  • Adopt
Procedure
1) SSH to AP
2) Login to AP
Follow command sequence detailed below:
login as: admin
admin@10.0.0.204's password:
ap8232-4C9B90>enable
ap8232-4C9B90#self
Enter configuration commands, one per line.  End with CNTL/Z.
ap8232-4C9B90(config-device-FC-0A-81-4C-9B-90)#no mint mlcp vlan
ap8232-4C9B90(config-device-FC-0A-81-4C-9B-90)#no mint mlcp ip
ap8232-4C9B90(config-device-FC-0A-81-4C-9B-90)#commit write
[OK]
ap8232-4C9B90(config-device-FC-0A-81-4C-9B-90)#
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255