Reset Search
 

 

Article

how to configure a client timeout on WM3000 series

« Go Back

Information

 
Titlehow to configure a client timeout on WM3000 series
Objective
This explains how you can configure an idle timeout for wireless clients on the WM3000 series CLI.
Environment
  • WM3000
  • WM3400
  • WM3600
  • WM3700
  • WiNG 5
Procedure
In the CLI under the WLAN in question you can configure the "wireless-client inactivity timeout" with a value between 60 and 86400 seconds.
Don't forget to "commit" and "write" after the configuration changes to enable and to save them.

Example with a WLAN called "testing" and setting the timeout to two hours (7200 seconds):

wm3400-54A3XX>en
wm3400-54A3XX#config t
Enter configuration commands, one per line.  End with CNTL/Z.
wm3400-54A3XX(config)#wlan testing 
wm3400-54A3XX(config-wlan-testing)#wireless-client inactivity-timeout ?
  <60-86400>  Inactivity timeout in seconds

wm3400-54A3XX(config-wlan-testing)#wireless-client inactivity-timeout 7200
wm3400-54A3XX(config-wlan-testing)#com wr
[OK]
wm3400-54A3XX(config-wlan-testing)#

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255