Reset Search
 

 

Article

How to configure BUM control on VPLS/VLL end point on SLX?

« Go Back

Information

 
TitleHow to configure BUM control on VPLS/VLL end point on SLX?
Question
How to configure BUM control on VPLS/VLL end point on SLX?
 
Environment
  • SLX 9850 / 9540 / 9640
  • SLX-OS routing code
  • MPLS VPLS/VLL
  • Network topology shown below:
 User-added image
Answer
BUM control configuration:

interface Ethernet 1/2
 switchport
 switchport mode trunk
 switchport trunk tag native-vlan

 storm-control ingress broadcast limit-bps 1000000000 monitor
 storm-control ingress multicast limit-percent 1 shutdown
 storm-control ingress unknown-unicast limit-bps 10000000
 no shutdown
 logical-interface ethernet 1/2
 vlan 100

 
Additional notes
Verification command:

show storm-control interface ethernet 1/2

 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255