Reset Search
 

 

Article

Brocade MLX, mark DSCP at Egress

« Go Back

Information

 
TitleBrocade MLX, mark DSCP at Egress
Question
How do I mark outgoing packets on my egress port with DSCP AF31?
Environment
  • MLXe
  • NetIron OS 6.0.00g code
  • Egress encode DSCP policy map configuration
Answer
Execute the steps below:
  1. Configure egress encode DSCP policy map below:
qos-mapping
  dscp encode-map test
    priority 0 to dscp-value 26
    priority 1 to dscp-value 26
    priority 2 to dscp-value 26
    priority 3 to dscp-value 26
    priority 4 to dscp-value 26
    priority 5 to dscp-value 26
    priority 6 to dscp-value 26
    priority 7 to dscp-value 26
  1. Bind egress encode DSCP policy map to a port:
telnet@MLX#conf t
telnet@MLX(config)#int e 10/16
telnet@MLX(config-if-e10000-10/16)#qos dscp encode-policy test
  1. Enable egress encode DSCP policy map on a port:
telnet@MLX(config-if-e10000-10/16)#qos dscp encode-policy on

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255