Reset Search
 

 

Article

Why do I not see the output for "Line Speed Actual" for the Management Interface in NOS 4.1.3d?

« Go Back

Information

 
TitleWhy do I not see the output for "Line Speed Actual" for the Management Interface in NOS 4.1.3d?
Question
  • Why do I not see the output for "Line Speed Actual" for the Management Interface in NOS 4.1.3d?
Environment
  • NOS 4.1.3d
Answer
This output was removed from NOS 4.1.3d due to issues it caused showing the interface UP at all times.

Output from NOS 4.1.3a:
sw0# show interface Management 
interface Management 10/0 
ip address "static 192.168.0.2/24" 
ip gateway-address 0.0.0.0 
ipv6 ipv6-address [ ] 
ipv6 ipv6-gateways [ ] 
line-speed actual "100baseT, Duplex: Full" 
line-speed configured Auto 

Output from NOS 4.1.3d where this line is removed:
sw0# show interface Management 
interface Management 10/0 
ip address "static 192.168.0.2/24" 
ip gateway-address 0.0.0.0 
ipv6 ipv6-address [ ] 
ipv6 ipv6-gateways [ ] 
line-speed configured Auto

For Hardware 67xx, 6940, or 8770:
4.1.3d is no longer supported, upgrade to NOS 6.0.0 or higher if you wish to see this output

For Hardware 6710/20/30:
4.1.3d is the last supported version for these platforms and the command is functioning as designed
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255