Reset Search
 

 

Article

After doing a factory reset on AP - radio does not return to static channel plan

« Go Back

Information

 
TitleAfter doing a factory reset on AP - radio does not return to static channel plan
Question
Why is it that after doing a factory reset on an AP ( cset factory ) , the radio does not return to static channel plan defined on the controller.
Environment
Identify
 
Answer
If ap is factory defaulted, the controller values are meaningless. The ap will go to auto channel selection since the config is cleared and push this information to the controller. Channel settings are saved on the ap. The last configured channel “command” saved on the controller is only for reference or saved if the ap was offline when the command was set. The only way to fix a situation where aps have gone off their static channel plan would be to either set them manually, or run a script that puts them back.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255