Reset Search
 

 

Article

Can I configure more than one IPFIX collector on XOS device

« Go Back

Information

 
TitleCan I configure more than one IPFIX collector on XOS device
Question
Environment
  • Summit: x460-G1/G2, x480
  • XOS: 12.5 >=
Answer

Configuring a Collector

To export flow records using the IPFIX protocol, you must first configure a collector. Only a single collector is allowed. You can specify the source IP address and VR to use when sending from the switch to a given collector. When not specified, the system defaults to the switch IP address the traffic exits.

  • To specify the Source IP address to be used in IPFIX packets, use the following command:
    configure ip-fix source ip-address ipaddress {vr vrname}
  • To reset back to the default of using the switch IP, use the following command:
    unconfigure ip-fix source ip-address
  • To specify the IP address, port number, transport protocol and VR for a collector, use the following command:
    configure ip-fix ip-address ipaddress {protocol [sctp | tcp | udp]} {L4-port portno} {vr vrname}
  • To unconfigure this, use the following command:
    unconfigure ip-fix ip-address
Additional notes
Please see the XOS datasheet for further information ExtremeXOS-DS

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255