Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

How do I configure an LACP LAG between EXOS and IdentiFi AP3825/AP3865/AP3935/AP3965

« Go Back

Information

 
TitleHow do I configure an LACP LAG between EXOS and IdentiFi AP3825/AP3865/AP3935/AP3965
Question
How do I configure an LACP LAG between EXOS and IdentiFi AP3825, AP3865, AP3935, or AP3965? 
Environment
  • ExtremeWireless
  • ExtremeSwtiching
  • AP3825i, AP3825e, AP3865i, AP3865e,  AP3865e, AP3935i, AP3935e, AP3965i, and WS-AP3965e
  • Summit: All
  • EXOS: All
Answer
Note: Enable LACP on AP prior to configuring switch
In order to configure an LACP LAG between an EXOS switch and an ExtremeWireless AP3825 and AP3935 use the following steps:

In the ExtremeWireless GUI:
  1. Select the AP menu. 
  2. Under the APs section select the Access Point
  3. Select the Static Configuration tab
  4. Check the LACP box (see screenshot)
  5. Save
On EXOS switch:
  1. enable sharing <port> grouping <master-port>, <grouping-ports> algorithm address-based lacp
Note:  If you configure LACP on the switch first, then the AP will reboot and will not come back up on the network (Will lose contact with controller).
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255