Reset Search
 

 

Article

How do I set, interface vlan 10 for tacacs source interface?

« Go Back

Information

 
TitleHow do I set, interface vlan 10 for tacacs source interface?
Question
How do I set, interface vlan 10 for tacacs source interface and to provide LLDP neighbor information?
Environment
  • S-Series
  • All Firmware
Answer
First Set the Default Interface
 
set ip interface vlan.0.10 default
Secondly, make sure you see the * by the interface in question (vlan.0.10), and if not enter "management" on the ip address command as also shown below:
S1 Chassis(su)->show ip interface vlan.0.10 brief
Interface IP Address Netmask Fwding Status Status
------------ --------------- --------------- -------- ------ ------
vlan.0.10 *10.1.1.1 255.255.255.0 enabled up up

* Active Management Address

interface vlan.0.10
ip address 10.1.1.1 255.255.255.0 primary management
Additional notes
Example of Show LLDP output
X450G2-1.7 # sh lldp neighbors detailed 

----------------------------------------------------------------------------- 
LLDP Port 52 detected 1 neighbor 
Neighbor: 10.1.1.1/tg.3.13, age 15 seconds 
- Chassis ID type: MAC address (4) 
Chassis ID : 20:B3:99:57:E0:61 
- Port ID type: ifName (5) 
Port ID : "tg.3.13" 
- Time To Live: 120 seconds 
- System Name: "sample" 
- Management Address Subtype: MAC (6) 
Management Address : 10.1.1.1
Interface Number Subtype : ifIndex (2) 
Interface Number : 0 
Object ID String : "1.8.46.48"

 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255