Reset Search
 

 

Article

How long do ports remain disabled when using the out-action for flood rate-limiting?

« Go Back

Information

 
TitleHow long do ports remain disabled when using the out-action for flood rate-limiting?
Question
Environment
  • Summit: All
  • BD: All
  • EXOS:  => 16.1
Answer
The ports will remain disabled unless they are manually enabled.  However there is a command that can automate this process
 
clear port [all | port_list | port_group ] rate-limit flood out-of-profile { disabled-ports } { status | counter }

 
Additional notes
  • The clear ports rate-limit flood out-of-profile command allows the clearing of the counter and/or status of ports of a flood rate-limiter that may have had their limit exceeded.
  • For the entered ports, the status option removes the ports from the disabled port out-of-profile list, re-enables ports that may have been disabled due to out-of-profile rate-limit, and re-enables the syslog and traps for those ports as well. For the entered ports, the counter option resets the counters.
  • If neither option is specified, both the status and counter will be cleared. If the disabled-ports option is specified, only the out-of-profile statuses that have disabled ports will be cleared.
  • If no options are specified, all out-of-profile statuses will be cleared.

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255