Reset Search
 

 

Article

How to Configure Timed Reset with NMS on an EOS Switch

« Go Back

Information

 
TitleHow to Configure Timed Reset with NMS on an EOS Switch
Question
How to Configure Timed Reset with NMS on an EOS Switch
Environment
  • EOS
  • NMS
  • All Hardware Versions
  • All Firmware Versions
  • All Software versions (NMS)
  • Inventory Manager (NMS)
Answer
  1. In Inventory Manager (NMS), right Click on device under Network Elements.
  2. Select "Wizard","Reset Wizard
  3. Verify Switch is in right Pane (Selected Devices) and Click "Next"
  4. Click "Select" under Reset Time Option.
  5. Enter Day and time you wish to reset the device and Click the "OK" Button
  6. Click the "Start" Button and the process has begun.
  7. To verify, access switch and execute "show reset"
Additional notes
Note: Reset will NOT occur if the switch is not accessible through SNMP at the preconfigured time.
Note: Does IM Reset Wizard & EMC "Reset" Option Clear a Switch to Factory Defaults?

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255