Reset Search
 

 

Article

How to apply a WING VX appliance license key via the CLI

« Go Back

Information

 
TitleHow to apply a WING VX appliance license key via the CLI
Question
How to apply a VX appliance license key via the CLI
Environment
  • WiNG
  • VX
  • VX9000
  • appliance license
  • license
  • CLI
Answer
 
  1. SSH into the VX wireless controller
  2. Execute the following commands: 
>en 
#self 
#license vx <license key> 
#com wr
#show licenses
Example: 
vx9000>
vx9000>en
vx9000#self
Enter configuration commands, one per line. End with CNTL/Z.
vx9000(config-device-00-15-5D-01-12-A1)#license VX eec0987654321e321aa12345678901234e123456c45f6e01a23d45ae76
c1abbd345c9adea5ad789a
vx9000-0C67A1(config-device-00-15-5D-01-12-A1)#com wr
[OK]
vx9000-0C67A1(config-device-00-15-5D-01-12-A1)#show licenses
Serial Number : 123B1D987AE135D5

Device Licenses:
AP-LICENSE
String :
Value : 0
Borrowed : 0
Total : 0
Used : 0
AAP-LICENSE
String : VX-DEFAULT-64AAP-LICENSE
Value : 64
Borrowed : 0
Total : 64
Used : 0
ADVANCED-SECURITY
String : DEFAULT-ADV-SEC-LICENSE
VX-LICENSE
String : eec0987654321e321aa12345678901234e123456c45f6e01a23d45ae76
c1abbd345c9adea5ad789a
vx9000(config-device-00-15-5D-01-12-A1)#

If you have any question or need further technical assistance, please do not hesitate to contact the Global Technical Assistance Center (GTAC) of Extreme Networks. 
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255