Reset Search
 

 

Article

How to check VLAN statistics on MLX devices?

« Go Back

Information

 
TitleHow to check VLAN statistics on MLX devices?
Question
  • NetIron XMR/ MLX version 5.0.0 onwards
  • Only supported on 8x10g cards
Environment
Answer
To see inbound and outbound traffic for a particular VLAN, enableVLAN statistics for the VLAN.

To enable or disable accounting on switched packets and routed packets separately, enter the following:

NetIron(config)#statistics
NetIron(config-statistics)#extended-counters routed-switched


NetIron#shVLAN 10 statistics detail
VLAN 10:Extended Counters <-- only applicable for G2 modules

Interface RxPkts TxPkts RxBytes TxBytes

Slot 1:
eth 1/1
Routed 0 0 0 0
Switched 0 0 0 0
Combined 0 0 0 0



Note: This also enables SNMP view of statistics for virtual routing interfaces on 8x10 modules only. Other line cards are not supported by this feature.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255