Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

How to check and change the netsight, NAC and Purview appliances date and time.

« Go Back

Information

 
TitleHow to check and change the netsight, NAC and Purview appliances date and time.
Question
How to check and change the netsight, NAC and Purview appliances date and time.
Environment
  • Netsight
  • NAC
  • Purview
  • NTP
Answer
SSH into the appliances and enter date to check the current date and time.
The following will display. 



To change the time, or to setup/change NTP settings.
from shell
cd /usr/postinstall/

dateconfig
This process will run through the current time configurations and allow for changes.
If NTP server is available in the network please use IP to sync the time from server. or configure the date and time zone manually.
 
Additional notes
We have to use below formats for date time inputs.

MM   - 2 digit month of year
DD   - 2 digit day of month
YYYY - 4 digit year
hh   - 2 digit hour of day using a 24 hour clock
mm   - 2 digit minute of hour
ss   - 2 digit seconds

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255