Reset Search
 

 

Article

How to manually configure an ESA Port from the Console of a V2110

« Go Back

Information

 
TitleHow to manually configure an ESA Port from the Console of a V2110
Question
How to manually configure an ESA Port from the Console of a V2110
Environment
  • Identifi V2110
  • All Firmware
  • VMWare
  • ESXi
Answer
Type topology hit enter, prompt changes to topo then type the following:
 
create "esa0" physical 600 port esa0 untag 10.26.6.51/24
apply
This creates esa0 as a physical port,assigns it to vlan 600, untagged, using port esa0 with IP of whatever mask you specify.

You can use the command SHOW to see what is configured at any time. Make sure to do enable “mgmt.” so you can https: to this new IP from the LAN

Example:
​https://10.26.6.51:5825

In order to enable AP registration if the port you’re creating is the one you want APs to register to.
To do that, from the topology prompt, type “l3” and hit enter. At the l3 prompt:
set ap-register enable
set mgmt enable
apply
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255