No, this is not possible due to Auto negotiation reasons.
Auto-negotiation is mandatory for 10GbBase-T according to the 802.3 standard, while it’s not possible on fiber due to the possible different wavelengths of light and different signal timing in the various types of transceivers.
# show ports 1:48,3:48 configuration no-refresh
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
1:48 VR-Default E R OFF 10000 FULL NONE
3:48 VR-Default E A ON 10000 10000 FULL FULL SYM 3:48 UTP
XXXXXXXX# configure sharing 3:48 add ports 1:48
Error: Member Port 1:48 has Auto Negotiation Off while Master Port has Auto Negotiation On
Configuration failed on backup Node, command execution aborted!