Reset Search
 

 

Article

Is there something similar to Dual Mode Brocade ICX on the VDX?

« Go Back

Information

 
TitleIs there something similar to Dual Mode Brocade ICX on the VDX?
Question
Is there something similar to Dual Mode Brocade ICX on the VDX?
Environment
  • VDX
  • NOS
Answer
From Ruckus docs:

Configuring a tagged port as a dual-mode port allows it to accept and transmit both tagged traffic and untagged traffic at the same time. A dual-mode port accepts and transmits frames belonging to VLANs configured for the port, as well as frames belonging to the default VLAN (that is, untagged traffic).

Configuration example on VDX:
VDX# show running-config interface TenGigabitEthernet 1/0/1
interface TenGigabitEthernet 1/0/1
switchport
switchport mode trunk-no-default-native
switchport trunk allowed vlan add 19-20
switchport trunk native-vlan-untagged 2
spanning-tree shutdown
no fabric isl enable
no fabric trunk enable
fabric neighbor-discovery disable
no shutdown

That will only work if virtual fabric is enabled, check if it's enabled as follow:
VDX# show running-config vcs
vcs virtual-fabric enable


 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255