Reset Search
 

 

Article

<Warn:Kern.IPv4Adj.Warning> log messages

« Go Back

Information

 
Title<Warn:Kern.IPv4Adj.Warning> log messages
Question
What does the following log message mean?

<Warn:Kern.IPv4Adj.Warning> vrId 2 adj 0x0A3C482F Add had mixed results. 1 units succeeded, 1 failed (rc Operation failed) flags 0x8000


 
Environment
  • BD-8810

  • Summit X460-48p
  • ​Summit X460-G2 
  • EXOS  15.3.2.11
  • ​EXOS  15.5
  • EXOS 16.1.1.4

Answer
  • This warning message indicates that ARP entry was trying to be installed into ipv4adj table but the entry already exists.

  • These messages could have indicated an actual hardware table full at the time but also an indication that possibly the tables became out of sync (hardware/software out of sync problem) which should be resolved with a reseat the IO module if the network is redundant/disable slot and enable it again or reboot the switch.

Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255