Can't find what you need?


• Ask the Community
• Create a Case
Reset Search
 

 

Article

What OIDs are used for Port Utilization so that I can poll this information using an NMS or MIB browser?

« Go Back

Information

 
TitleWhat OIDs are used for Port Utilization so that I can poll this information using an NMS or MIB browser?
Question
What OIDs are used for Port Utilization so that I can poll this information using an NMS or MIB browser?
Environment
EXOS
Answer
Port utilization is calculated as an average. The following OIDs are used under the extremePortUtilization Entry. Values will be polled for all ports unless the port number is appended after the OID, ex. .1, .2 .16, ect.

"extremePortUtilizationEntry",".iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremePort.extremePortUtilizationTable.extremePortUtilizationEntry",".1.3.6.1.4.1.1916.1.4.5.1"
"extremePortUtilizationAvgTxBw",".iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremePort.extremePortUtilizationTable.extremePortUtilizationEntry.extremePortUtilizationAvgTxBw",".1.3.6.1.4.1.1916.1.4.5.1.1"
"extremePortUtilizationAvgRxBw",".iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremePort.extremePortUtilizationTable.extremePortUtilizationEntry.extremePortUtilizationAvgRxBw",".1.3.6.1.4.1.1916.1.4.5.1.2"
"extremePortUtilizationPeakTxBw",".iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremePort.extremePortUtilizationTable.extremePortUtilizationEntry.extremePortUtilizationPeakTxBw",".1.3.6.1.4.1.1916.1.4.5.1.3"
"extremePortUtilizationPeakRxBw",".iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremePort.extremePortUtilizationTable.extremePortUtilizationEntry.extremePortUtilizationPeakRxBw",".1.3.6.1.4.1.1916.1.4.5.1.4"


User-added image

This would be identical to using the show port utilization command directly from the CLI.

(debug) X450e-48p.19 # show port utilization
Link Utilization Averages                            Thu Sep 29 21:28:26 2016
Port     Link    Rx              Peak Rx          Tx               Peak Tx
         State   pkts/sec        pkts/sec         pkts/sec         pkts/sec
================================================================================
1         A             0              0                0            7761
2         A             0          54949                0               0
3         R             0              0                0               0
4         R             0              0                0               0
5         R             0              0                0               0
6         R             0              0                0               0
7         R             0              0                0               0
8         R             0              0                0               0
9         R             0              0                0               0
10        R             0              0                0               0
11        R             0              0                0               0
12        R             0              0                0               0
13        R             0              0                0               0
14        R             0              0                0               0
15        R             0              0                0               0
16        R             0              0                0               0
================================================================================
          > indicates Port Display Name truncated past 8 characters
          Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255