Reset Search
 

 

Article

What are the TCP/UDP ports used between IdentiFi Wireless Controller and APs?

« Go Back

Information

 
TitleWhat are the TCP/UDP ports used between IdentiFi Wireless Controller and APs?
Question
What are the TCP/UDP ports used between IdentiFi Wireless Controller and APs?
Environment
  • ExtremeWireles
  • Defender for IoT (AP3912)
  • All firmware versions
  • Firewall
  • TCP
  • UDP
  • TFTP
  • WASSP
Answer
 
SourceDestinationProtocol
(TCP/UDP)
Src PortDst PortServiceRemarks
ControllerAccess PointUDPAny13910Controller Tunnel ProtocolWireless data and control tunnel traffic
Access Point

Controller

UDPAny13910Controller Tunnel ProtocolWireless data and control tunnel traffic
Access PointControllerUDPAny13907AP RegistrationAP to controller discovery
ControllerAccess PointTCP/UDPAny69TFTPAP image transfer
Controller Access PointUDPAny4500IPSEC - Secure Tunnel Secure Controller Tunnel Protocol 
Access Point ControllerUDPAny427Service Location Protocol AP registration to the controller via Layer 2 

Note: 
TFTP uses port 69 only when the secure control tunnel is NOT enabled between the AP and controller. If the secure control tunnel is enabled TFTP exchanges take place within the secure tunnel and port 69 is not used.




 
Additional notes
The release notes for all firmware versions have a detailed list of all the ports the controllers and access points use

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255