Reset Search
 

 

Article

What commands show port vlan and tagging information

« Go Back

Information

 
TitleWhat commands show port vlan and tagging information
Question
What commands show port vlan and egress details?
Environment
  • S-Series
  • N Series
  • K Series
  • Securestack
  • Tagged
  • Untagged
  • Egress
  • Port
  • Firmware all versions
  • Vlan
Answer
The following commands will verify port vlan details

1. Type show port status (port string) Verify the port has a link as you will not see vlan status until the port has active link
2. Type show vlan portinfo port {port string} 
3. Type show vlan static {vlan id} This command will show port vlan settings even if there is no link. 
4. Type show vlan portinfo [port port-string] [vlan vlan]
5.Type show config  ( verify port settings from the configuration )
6. Type s
how port vlan  ( This shows the ports native vlan. Each port may only have one native vlan id assigned. Ports can egress many tagged vlans )
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255