Reset Search
 

 

Article

What console speed should be set when connecting an EXOS switch to the management console

« Go Back

Information

 
TitleWhat console speed should be set when connecting an EXOS switch to the management console
Question
  • What console speed should be set when connecting an EXOS switch to the management console
  • No console output when connected to X690 & X870
Environment
  • All EXOS
  • Summit & BlackDiamond
  • Console Speed
Answer
  1. Console speed for all the EXOS switches must be set to 9600 (Baud rate) when connecting to management console except X690 and X870 switches
Baud rate: 9600 
Data bits: 8
Stop bit: 1
Parity: None
Flow control: XON/XOF
       2. When using the RJ45 Ethernet management port on a X690 or X870 series switches, console speed must be set to 115200.

Related Articles:
How to connect to the switch console via RJ-45
What type of serial cable is needed to console into an EXOS switch with a DB-9 console port?
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255