Reset Search
 

 

Article

What port does Netflow use on the IdentiFi Wireless controller to talk to Purview/Analytics appliance?

« Go Back

Information

 
TitleWhat port does Netflow use on the IdentiFi Wireless controller to talk to Purview/Analytics appliance?
Question
  • What port does Netflow use on IdentiFi Appliance?
  • What udp port does EWC use to talk to Purview?
  • What port does the EWC/Identifi Controller use to talk to Analytics appliance?
Environment
  • IdentiFi - Version 9.21.xx and above
  • Purview 6.3 and above
  • Netsight 6.3 and above
  • Extreme Management Center
  • Analytics
  • XMC
Answer
It uses port  2095 from the Wireless controller to talk to Analytics on. It does not use port 2055.
Additional notes
TCPDUMP Sample from Purview box.
 
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes
10:39:04.706025 IP 10.0.0.250.2095 > purview.2095: UDP, length 84
10:39:34.783988 IP 10.0.0.250.2095 > purview.2095: UDP, length 84
10:40:04.863822 IP 10.0.0.250.2095 > purview.2095: UDP, length 84

If no records are seen from this host address at all,
then see the following article to make sure the management port is set correctly. 
No Netflow records are exported from Indentifi Wireless Controller or EWC to Purview
 

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255