Reset Search
 

 

Article

Why I do see wrong AP image version on WiNG controller?

« Go Back

Information

 
TitleWhy I do see wrong AP image version on WiNG controller?
Question
While performing upgrade APs got wrong version of WiNG software? Do you see incorrect version under available images?
Environment
  • All Summit WM3000 Series Controllers
  • ExtremeWiNG Controllers
  • WirelessWiNG Controllers
  • ExtremeWiNG Access Points
  • WirelessWiNG Acess Points
  • WiNG 5 Software
Answer
If you see incorrect versions being available, or your APs got upgraded with wrong version of WiNG code, please confirm that correct images are uploaded on your controller.

It is possible that you previously did upload Wing 5x AP firmware image to Wing controller

Navigate to Operations - select controller in System tree - Adopted Device Upgrade - Device Image File
 
User-added image

Or using CLI command
VX# show device-upgrade versions
--------------------------------------------------------------------------------
        CONTROLLER             DEVICE-TYPE                   VERSION
--------------------------------------------------------------------------------
                         <omitted>
  VX                      ap7502                   5.9.1.3-007R
  VX                      ap7522                   5.8.6.0-011R
  VX                      ap7532                   5.8.6.0-011R
  VX                      ap7562                   5.8.6.0-011R
  VX                      ap7602                   5.9.1.3-007R
                         <omitted>
  VX                      ap8533                   5.9.1.3-007R
  VX                      nx45xx                   none
  VX                      nx5500                   none
                         <omitted>
  VX                      vx9000                   none
--------------------------------------------------------------------------------

If you see incorrect version of code do take a look into File Management and navigate to flash:/upgrade folder, see if there are any custom images and delete those
 
User-added image

The same you can do using CLI
 
VX# dir flash:/upgrade/
Directory of flash:/upgrade/

  -rw-   37489580  Thu Mar 29 12:47:28 2018   birch.img

VX#
VX# delete flash:/upgrade/birch.img
Delete flash:/upgrade/birch.img [y/n]? y
Make sure this is done on all controllers in cluster!
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255