Reset Search
 

 

Article

Why is VDX "track interface port-channel 300" command missing in running-config after reboot?

« Go Back

Information

 
TitleWhy is VDX "track interface port-channel 300" command missing in running-config after reboot?
Question
VDX "track interface port-channel 300" command is missing in running-config after reboot in fabric cluster mode.

Issue:

*********** startup-config before power cycle * !

SW0$ show startup-config
interface TenGigabitEthernet 1/0/11
mtu 9208
track enable
track interface port-channel 300
******** monitoring port-channel of uplink ports ****
switchport
: <<< snip >>>
****************************************************
* power cycle *
****************************************************

************* running-config after power cycle *

sw0# show running-config
: <<< snip >>>
!
interface TenGigabitEthernet 1/0/11
mtu 9208
track enable
switchport
******** track setting is not loaded ****
: <<< snip >>>

************** startup-config after power cycle *

Sw0# show startup-config
: <<< snip >>>
!
interface TenGigabitEthernet 1/0/11
mtu 9208
track enable
track interface port-channel 300
******** track setting in startup-config ****
switchport

Environment
Answer
Upgrade to a version of code that contains the fix by reviewing Release Note updates.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255