Reset Search
 

 

Article

Why do I get error message when configure IP address for ve interface on VDX6740 switch ?

« Go Back

Information

 
TitleWhy do I get error message when configure IP address for ve interface on VDX6740 switch ?
Question
     Why do I get error message "syntax error: element does not exist" when configure IP address for ve interface on VDX6740 switch?
R-VDX6740# con t
Entering configuration mode terminal
R-VDX6740(config)# int ve 900
R-VDX6740(config-Ve-900)# ip address 10.251.106.217/29
------------------------------------^
syntax error: element does not exist

 
Environment
  • Network OS
  • VDX
Answer
This is not the correct syntax for this functionality on Network OS , the IP address for ve interface need be configured under rbridge-id mode .
Here is the correct syntax example:
R-VDX6740# con t
Entering configuration mode terminal
R-VDX6740(config)# rbridge-id  3
R-VDX6740(config-rbridge-id-3)# interface ve  900
R-VDX6740(config-rbridge-Ve-900)# ip address 10.251.106.217/29
R-VDX6740(config-rbridge-Ve-900)#

 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255