Reset Search
 

 

Article

Why on a compass search the column User name (user that is logged on) is not being shown, or not populated?

« Go Back

Information

 
TitleWhy on a compass search the column User name (user that is logged on) is not being shown, or not populated?
Question
  • Tried restarting server,
  • Verified in different switches of the Network
  • Used the command :  set nodealias enable <port-string> on the switches polled
Environment
  • Netsight 6.3
  • Oneview
  • 802.1x
  • Web Based authentication
Answer
The user name search requires that Web-based or 802.1X authentication be supported and enabled on the device(s). 
 
Host Name
Host name associated with the network element's IP address, if applicable.
User Name
User ID associated with the network element, if applicable.
State
Current operating state of the network element. Possible values are:
 
StateMeaning
initialize an initialize is in progress returning the port to an initial state
active connection is active
inactive, connection is inactive
disconnected, no user is logged in.
authenticating a login is in process and has not yet completed
authenticated a user has successfully logged in
held the port is locked down because the number of failed login attempts has exceeded the allowable limit.
connecting connection in process
aborting indicates an authentication timeout
forceAuth the port is always authorized
forceUnauth an administrator has terminated the user session
authSuccessmeans authentication was attempted and succeeded
authTerminated a session was active or in progress and was subsequently terminated
<blank>. State was not retrieved
 
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255