Use the Four Piece Rack Mount Kit to attach the necessary hardware for mounting an Extreme Networks switch in a standard 19-inch equipment rack with a four-post configuration. The Four Piece Rack Mount Kit provides the hardware needed to install an Extreme Networks switch in a two-post or four-post equipment rack. The kit is specifically intended for use with Summit and ExtremeSwitching switches.
Note: All Summit and ExtremeSwitching models ship with the required rack mounts. This rack mount kit is intended as a spares kit to replace lost or damaged rack mount elements for the switches listed above.
The following switch models can use both the short and long brackets that are included in the kit:
- X460-G2 PoE (Power over Ethernet) models
The following switch models use the short brackets only. (To mount these switches in a four post rack configuration you must use the 16776 Rear Rail Kit - Four Post Mounting):
- X460-G2 non-PoE models
- X620 (16-port models)
What’s Included with the Four Piece Rack Mount Kit, - Spare:
- Two long mounting brackets
- Two short mounting brackets
- Screws for securing the brackets to the switch