Reset Search
 

 

Article

ERS 8600: Unable to add ports to vlan x+; getting error:Other ports are using the same key. Can not change port vlan membership.

« Go Back

Information

 
TitleERS 8600: Unable to add ports to vlan x+; getting error:Other ports are using the same key. Can not change port vlan membership.
Symptoms
  • Trying to add a port to a vlan and unable to.
  • Error: Other ports are using the same key. Can not change port vlan membership
Environment
  • ERS 8000
  • All software versions
Cause
LACP may be enabled on the port and/or there could be corrupted entries. 
Resolution
  • If LACP is enabled on that port, disable the feature, attempt to add the port again then re-add LACP to the port.
  • If LACP is not enabled, check the LACP table and search for corrupted entries. In this case, reboot the switch to remove the corruption.
Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255