Reset Search
 

 

Article

LPID Error Seen On I/O Module

« Go Back

Information

 
TitleLPID Error Seen On I/O Module
Symptoms

Below error messages noticed in logs and there is no service impact.

IOX [date] 0x000005e0 00000000 GlobalRouter SW ERROR InvalidLPID: 2908 for getPimPortFromLpid conversion!!!
IOX [date] 0x0001c68d 00000000 GlobalRouter HW ERROR getSlotIdFromLpid: LPID (2908) is not associated with a slot!
IOX [date] 0x000005e0 00000000 GlobalRouter SW ERROR Invalid LPID: 3392 for getPimPortFromLpid conversion!!!
IOX [date] 0x0001c68d 00000000 GlobalRouter HW ERROR getSlotIdFromLpid: LPID (3392) is not associated with a slot!
IOX [date] 0x0001c68d 00000000 GlobalRouter HW ERROR getSlotIdFrom Lpid: LPID (3076) is not associated with a slot!
IOX [date] 0x000005e0 00000000 GlobalRouter SW ERROR Invalid LPID: 3076 for getPimPortFromLpid conversion!!!

 

Environment
VSP 9000 running any supported software.
Cause

Issue is due to improper implementation of recommended procedures.

Resolution

IPFIX is not supported on SPBM NNI interfaces. The reason for the message is that an invalid LPID (logical port id) was being provided because the PIM port (i.e. the Port Interface Module) was outside of the expected range, namely outside 0 – 127.  Subsequently, as the LPID of 3076 or 2908 is out of range, the LPID is also not associated with a slot either. This configuration of IPFIX on ISIS enabled ports is not yet supported.

Workaround: Disable IPFIX on the SPBM NNI interfaces.

Additional notes

Feedback

 

Was this article helpful?


   

Feedback

Please tell us how we can make this article more useful.

Characters Remaining: 255